An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

Real-time prediction of projectile penetration to laminates by training machine learning models withfinite element solver as the trainer

Studies on ballistic penetration to laminates is complicated, but important for design effective protection of structures. Experimental means of study is expensive and can often be dangerous. Numerical simu-lation has been an excellent supplement, but the computation is time-consuming. Main aim of this thesis was to develop and test an effective tool for real-time prediction of projectile penetrations to laminates by training a neural network and a decision tree regression model. A large number of finite element models were developed;the residual velocities of projectiles fromfinite element simulations were used as the target data and processed to produce sufficient number of training samples. Study focused on steel 4340tpolyurea laminates with various configurations. Four different 3D shapes of the projectiles were modeled and used in the training. The trained neural network and decision tree model was tested using independently generated test samples using finite element models. The predicted projectile velocity values using the trained machine learning models are then compared with thefinite element simulation to verify the effectiveness of the models. Additionally, both models were trained using a published experimental data of projectile impacts to predict residual velocity of projectiles for the unseen samples. Performance of both the models was evaluated and compared. Models trained with Finite element simulation data samples were found capable to give more accurate predication, compared to the models trained with experimental data, becausefinite element modeling can generate much larger training set, and thus finite element solvers can serve as an excellent teacher. This study also showed that neural network model performs better with small experimental dataset compared to decision tree regression model.     

基于Davenport风速谱的火箭及其发射平台风致响应分析

基于Davenport风速谱,采用M.Shinozuka法计算得到了三种不同基本风速下火箭芯级和助推器不同站点的风荷载时程样本,并调用MSC.Nastran软件对火箭及发射平台进行了瞬态响应分析,得到了停靠时不同基本风速下火箭及发射平台的位移响应。随着高度的增加,火箭芯级上各点的位移响应随之增加;不同基本风速下同一节点的最大位移之比约等于不同基本风速的平方之比。同时在脐带塔上设计了一个横拉减载结构,相同基本风速下的火箭位移响应明显减小,火箭及发射平台的抗风能力得到提高,对工程实际有较大的参考价值。     

临近空间大型柔性充气囊体结构特性分析

以临近空间平流层飞艇柔性充气囊体为研究对象,根据充气结构设计理论对充气囊体结构的最小压差和应力进行计算,建立平流层飞艇充气囊体结构有限元模型。在模型验证的基础上,采用非线性有限元方法对平流层飞艇充气囊体结构特性进行仿真分析,得到了囊体结构在不同压差和吊舱载荷作用下应力和变形分布及变化规律,并分析了结构加强配置对囊体应力和变形的影响,为平流层飞艇结构设计提供技术支撑和参考依据。     

多旋翼无人机减振分析与实验

针对多旋翼无人机机身系统振动过大导致飞行状态不稳的问题,基于有限元仿真技术与实验方法,进行了减振分析。通过频率分析,确定系统振动过大的原因为固有频率与激励频率耦合导致的共振现象,且共振频点的模态振型包含一阶挥舞、一阶摆振和二阶摆振振型。提出了优化机身壳体截面形状的设计方案,在不增加额外质量的情况下,将一阶挥舞、一阶摆振和二阶摆振振型对应的频点分别提高37.23%、22.47%和18.43%,有效规避了机身共振现象。仿真实验证明,提出的有限元仿真与实验结合的减振分析思〖BHDWG8,WK10YQ,DK1*2,WK1*2D〗〖XCMWL.TIF;%129%129〗听语音 聊科研与作者互动 路及优化设计方法,可为旋翼无人机减振设计提供参考依据。     

局部多孔质气浮止推轴承特性研究

在考虑轴承气膜交界面处切向速度滑移的条件下,建立了局部多孔质气浮止推轴承的理论模型,然后使用有限元算法进行了数值仿真,仿真的结果与试验结果取得了一定程度的一致性,说明此新的修改了的雷诺方程可以用来作为局部多孔质气浮止推轴承研究的理论模型。利用该模型,能够成功计算出不同渗透系数、不同厚度及不同直径的局部多孔质气浮轴承的流量、承载及刚度。还从理论上与小孔类型及全多孔质类型的气浮轴承特性进行了对比,结果表明,局部多孔质气浮轴承有着优良的特性及很好的应用前景。     

降落伞主充气阶段数值模拟

建立了降落伞主充气模型。前体、伞绳及伞衣离散为一系列弹性连接的质量节点,伞衣内部流场为二维无粘、不可压流。利用模型计算了主充气阶段伞衣形状变化、伞衣投影面积变化及伞绳张力。计算结果与试验结果进行了比较,相当吻合。     

防空预警雷达阵地配置及其物元分析

防空预警雷达阵地配置是防空兵战前决策的重要内容。首先分析了影响和决定防空预警雷达阵地配置的战术因素、生存因素和地形因素,总结了防空预警雷达阵地配置的约束条件,然后依据整体探测效能最优的原则提出了防空预警雷达阵地配置的基本模型,探讨了通过调整约束参数来自动生成方案及控制方案数量的问题,最后运用物元分析法对配置方案的合理性进行了分析评判,并对配置方案进行排序,以辅助指挥员决策。     

运动激光辐照圆柱薄壳温度场的数值模拟

对圆柱薄壳在四种不同运动模式激光源辐照下的温度场分布进行了分析研究。运用傅立叶级数展开法推导了在不同运动模式激光源作用下圆柱薄壳温度场的解析表达式,并对该解析表达式进行了编程计算,其计算结果与有限元解吻合良好。详细分析了旋转角速度与平动速度对圆柱壳温升分布的影响,发现在往复运动加热模式下光斑区域的温升变化最为剧烈。计算结果为导弹的抗激光辐射提供了理论依据。     

附连水质量的边界元法求解

研究了计算水下结构动态响应中附连水质量的边界元方法;根据数值积分和边界元法的原理,应用直线单元对结构边界进行离散,将原有表达形式中复杂的曲线积分转化成可直接计算的数值积分形式,从而解决了奇异积分的问题;得到了更适于直接计算的系数矩阵和向量的表达形式,使边界元法更方便地应用于计算无限流场中不规则截面物体的附连水质量.最后,给出了典型算例,并与经典计算结果比较,误差均在4%以内.